Lexmark C935 Series, Service Manual

Page: 415 / 630

Repair information
4-117
5057-XXX
Go Back
Previous
Next
Separation roll removal
1. Remove the media tray.
2. Move the feed unit front guide (A) in the direction of the arrow.
3. Release the hook securing the separation roll (B) to the shaft (C).
4. Remove the separation roll (B).
Note: Do not touch the rubber surface of the feed roll (B).
Replacement note: Before reinstalling, do not touch the rubber surface of the separation roll (B).
Sensor (RFID toner cartridge) removal
Note: This removal applies to the sensor (RFID K toner cartridge), (RFID C toner cartridge), (RFID M toner
cartridge) and (RFID Y toner cartridge).
1. Remove the top cover assembly. See “Top cover assembly removal” on page 4-4 .
2. Remove the printer front door assembly. See “Printer front door assembly removal” on page 4-3 .
3. Remove the front left cover. See “Front left cover removal” on page 4-9 .
4. Remove the waste toner cartridge cover. See “Waste toner cartridge cover removal” on page 4-39 .
5. Remove the waste toner cartridge sensor assembly. See “Waste toner cartridge sensor assembly removal”
on page 4-39 .
6. Remove the inner cover. See “Inner cover removal” on page 4-42 .
7. Remove the three CMY toner add assemblies. See “CMY toner add assembly removal” on page 4-46 .
8. Remove the K toner add assembly. See “K toner add assembly removal” on page 4-48 .
9. Remove the main power switch actuator. See “Main power switch actuator removal” on page 4-102 .
10. Remove the CMYK toner add motor assembly. See “CMYK toner add motor assembly removal” on
page 4-103 .
11. Release the hooks securing the appropriate sensor (RFID toner cartridge) (A) to the assembly.
12. Remove the appropriate sensor (RFID toner cartridge) (A).
A
C
B
Front