Lexmark C91 Series, Service Manual

Page: 302 / 493

4-56
Service Manual
5055-xxx
Transfer belt removal
Note: If the transfer belt removal was attempted without using the
Supplies Menu to lower the belt and the transfer belt is jammed or
stuck, go to
“Alternate method: Transfer belt was partially
removed” on page 4-64 .
To replace the transfer belt before the Life Warning or Exhausted
messages appear, open the Supplies Menu on the operator panel
and select Replace Supplies, select Belt, and select Replace Now.
If the 80 Transfer Belt Life Warning or Exhausted message
appears, press Select when the Select = Replace message
appears. The message Preparing for Maintenance appears,
followed by Printer Ready for Maintenance, then Power Off to
Replace Items.
Note: If the operator panel is inoperable or if you have an
unrecoverable error code, go to
“Alternate method: Operator
panel is inoperable or unrecoverable error code” on page 4-60 .
1. Turn the printer off along with any optional devices connected to
the printer.
2. Open the front cover and top unit.
Warning: Do not touch, drop or place anything on the transfer belt.
Touching the surface of the transfer belt or placing items on the belt
may cause damage.