Lexmark C91 Series, Service Manual

Page: 38 / 493

1-22
Service Manual
5055-xxx
Options and features
Lexmark C91x printers support only Lexmark C91x paper-handling
options. These options are not compatible with any other Lexmark
printer.
•
550-Sheet drawer—(includes 550-sheet tray and support unit)
installs beneath the printer and holds approximately 550 sheets
of 20 lb paper. Multiple optional drawers (up to 3) are supported
simultaneously.
•
High-capacity feeder—is designed to provide an additional
input tray (Tray 3 or Tray 5, depending on the configuration) with
a total capacity of 3,000 sheets (plain paper—letter or A4—20
lb (75 g/m
2
). The high-capacity feeder is customer installable
and attaches to the right side of the printer.
•
Heavy-media tray—is intended for special media such as
transparencies, labels and glossy paper. This is supported only
as Tray 1 (top drawer location).
•
Duplex unit—offers two-side printing and is designed to
complement the Lexmark C91x printers.
•
Finisher—offers stapling, hole punching, offset stacking and an
additional output bin. Two models are available. 3- or 4-hole left-
edge hole punching is available. The single staple position is the
upper left corner. The finisher can support up to 1,100 sheets of
unstapled, unpunched media. For stapled media, the output bin
supports up to 30 stapled sets or 1,000 sheets. The stapler can
staple a maximum of 30 sheets per set. Each printer can
support a single finisher.
•
Printer cabinet—is customer installable and attaches so the
printer sits on top of the printer stand. The printer cabinet raises
the printer to the correct height for use with the optional finisher
and high-capacity feeder. The printer cabinet and high-capacity
feeder can be installed at the same time.
– C91x – 1 optional drawer
– C91xn or dn – no optional drawers