Lexmark C91 Series, Service Manual

Page: 97 / 493

Diagnostic information
2-47
5055-xxx
56 USB Port
<x> Disabled
56 Std USB
Port Disabled
Data has been sent to the
printer through a disabled
USB port. • Press Go to clear the
message.
• Make sure the USB Buffer
menu item in the USB
Menu is set to Disabled.
58 Too Many
Bins Attached Too many output bins are
installed.
Unsupported output bins are
installed.
Turn off and unplug the
printer. Remove or
reconfigure the output bins.
Plug the printer in and turn it
on.
58 Too Many
Disks Installed Too many disks are installed. Turn off and unplug the
printer. Remove the excess
hard disks. Plug the printer
in and turn it on.
58 Too Many
Flash Options Too many flash options are
installed. Turn off and unplug the
printer. Remove the excess
flash options. Plug the
printer in and turn it on.
58 Too Many
Trays Attached Too many trays are installed. Turn off and unplug the
printer. Remove the excess
trays. Plug the printer in and
turn it on.
61 Defective
Disk The printer detects a
defective hard disk. • Press Go to clear the
message and continue
printing.
• Install a different hard disk
before you perform any
operations that require
one.
62 Disk Full Insufficient memory on the
hard disk. • Press Go to clear the
message and continue
printing.
• Delete fonts, macros, and
other data stored on the
hard disk.
Message Meaning Action