Lexmark C91 Series, Service Manual

Page: 91 / 493

Diagnostic information
2-41
5055-xxx
Ready Hex The printer is in Hex Trace
mode and is ready to receive
and process print jobs. • Send a job to print. All
data is printed in
hexadecimal. Control
strings are printed, not
executed.
• Turn the printer off and
then on to exit Hex Trace
mode.
Remove Paper
<specified bin> The specified output bin is
full. Remove the paper from the
specified bin(s).
Resetting
Maint Cnt
Value The printer is resetting the
counter that tracks wear on
the fuser. Wait for the message to
clear.
Resetting the
Printer The printer is resetting to the
current default settings. Any
active print jobs are
canceled. Wait for the message to
clear.
Restore Held
Jobs. Go/
Stop? The printer has been reset or
has been turned on and the
printer detects print and hold
jobs stored on the hard disk. Press Go. All jobs on hard
disk are restored.
Press Return or Stop. No
jobs are restored and the
printer returns to Ready.
Restoring
Factory
Defaults The printer is restoring
factory default settings. Wait for the message to
clear.
Restoring Held
Jobs The printer is restoring held
jobs from the hard disk. Wait for the message to
clear.
Serial <x> A serial interface is the
active communication link. Wait for the message to
clear.
Std Bin Full The standard bin is full. Remove the paper in the bin
to clear the message.
Supplies One of the printer supplies
requires attention. Press Menu to open the
Supplies Menu and identify
which supply item needs
replacing.
Message Meaning Action