Lexmark 13N1000 - C 920 Color LED Printer User Manual Download

Page: 93 / 163

Closing the top cover

Maintaining the printer

Reinstall all toner cartridges.

CAUTION:

Before closing the top cover, make sure everyone is away from the printer and the area under the
cover is free of hands, clothing, and other items.

Close the top cover and the front door.

Closing the top cover

CAUTION:

Before closing the top cover make, sure everyone is away from the printer and the area under the
cover is free of hands, clothing, and other items.

Place both hands on the top cover as shown.

Press down firmly until the top cover clicks into place.

Summary of Contents for 13N1000 - C 920 Color LED Printer




































































































































































Search results

Summary of Contents for 13N1000 - C 920 Color LED Printer

Reviews:

Related manuals for 13N1000 - C 920 Color LED Printer

Brands by name

Popular brands

Lexmark 13N1000 - C 920 Color LED Printer, User Manual

Search results

Summary of Contents for 13N1000 - C 920 Color LED Printer

Reviews:

Related manuals for 13N1000 - C 920 Color LED Printer

Brands by name

Popular brands