Loading the multipurpose feeder
64
Printing
5
Load the media in the tray and push the set button to raise the media for feeding.
Use the stack height label as a guide for stack height when loading print media.
Loading paper, transparencies, or envelopes
Note: Letterhead or other preprinted paper must be loaded differently depending on the options you have
installed.
Load envelopes flap side down. Orient them as indicated by the icons on the multipurpose feeder.
–
Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick adhesives. These
envelopes may severely damage the printer.
Note: Load only one size and type of print media at a time in the multipurpose feeder. Do not mix sizes and
types in the same tray.
Loading letterhead or preprinted paper
•
Print side face up for simplex (single-sided) printing
•
Print side face down for duplex printing
•
Do not fill paper above the load line. Overfilling the tray may cause jams.
6
Set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type) to the
correct value for the print media you loaded.
a
Press
on the operator panel.
b
Press
until you see
Paper Menu
.
c
Press .
d
Press
until you see
Paper Size/Type
.
e
Press .
f
Press
until you see
MP Feeder Size/Type
.
g
Press .
h
Press
until the
appears next to the media size you loaded.
i
Press .
j
Press
until you see
MP Feeder Size/Type
.
k
Press .
l
Press
until the
appears next to the media type you loaded.
m
Press .
The printer returns to the
Ready
state.
