Lexmark 13N1000 - C 920 Color LED Printer User Manual Download

Page: 63 / 163

Loading the multipurpose feeder

Printing

Push down the bottom plate until it locks into place.

Note: Do not place objects on the multipurpose feeder. Also, avoid pressing down on it or applying

excessive force to it.

Flex the sheets or envelopes back and forth to loosen them, then fan them. Do not fold or crease the print media.
Straighten the edges on a level surface.

Note: Hold transparencies by the edges and avoid touching the print side. Fan the stack of transparencies

to prevent jams. Be careful not to scratch or leave fingerprints on the transparencies.

Paper

Envelopes

Transparencies

Summary of Contents for 13N1000 - C 920 Color LED Printer




































































































































































Search results

Summary of Contents for 13N1000 - C 920 Color LED Printer

Reviews:

Related manuals for 13N1000 - C 920 Color LED Printer

Brands by name

Popular brands

Lexmark 13N1000 - C 920 Color LED Printer, User Manual

Search results

Summary of Contents for 13N1000 - C 920 Color LED Printer

Reviews:

Related manuals for 13N1000 - C 920 Color LED Printer

Brands by name

Popular brands