43
43
NuVerb
TDM User Guide
Program Descriptions
65
TELEPHONE
SINGLE
No bottom end....AT ALL.
Faders:
All faders are unused.
66
RVB ->RVB
CASCADE
Two independent reverbs with the left input feeding Machine A and the right input feeding Machine B. Each can be used
independently and, in fact, should be used that way. Pan the output of each Machine (at the console) to suit the mix. Effect
A is a great general purpose reverb tail. The size is set to 27.6M (the largest value is 66.4M) so the density is rather tight.
As you adjust SIZE, the Rt value will also change. If you want to unlink this natural phenomena, set LINK to Unlink. Effect
B is a nice “bloomy” sounding reverb. Diffusion is set midway, so there is some good articulation at the beginning of the
reverb envelope. Use this on most keyboards, but those with a strong point may require a bit more Diffusion.
Faders:
Predelay: 0m
Predelay: 0m
RTIME: 3.4s
RTIME: 2.5s
SPREAD: 93
67
DYNO VERB
CASCADE
Medium Reverb Time and large Size add width to the tone. This cascade program feeds an ample reverb through a
compressor with a high CompGain of 15dB. Effect A is a split chamber reverb with the Link function is set to Unlink to
achieve low reverb time with moderate Spread and large Size. The compressor in Effect B is set to a dramatic 2.33:1
Slope. While compressing, it is also strongly expanding the signal. CompGain is set 15 dB up.
Faders:
A Mix: WET
B Mix: WET
RTIME: 2.0s
Threshold: -12dB
CompGain: 15 dB
