5
5
NuVerb
TDM User Guide
Installing the Hardware and Software
Attaching the NuVerb TDM module to a NuVerb card
The NuVerb TDM module attaches to your NuVerb card. Only NuVerb cards with an attached
NuVerb TDM module can use the TDM option. NuVerb cards without the TDM module must
use the AES/EBU ports for audio input and output.
1. Place the foam from your NuVerb card package on top of a work surface next to your
Macintosh. (Any flat piece of foam with similar dimensions to the NuVerb card can be
used.)
2. Turn off and unplug your Macintosh.
3. Remove the Macintosh top cover and slot cover(s) of those NuBus slot(s) you’ve selected
for installation. Although the illustrations shown here depict installation in a typical
Quadra/Centris 650-model Macintosh, your installation should be similar. If you are
unsure of how to open and install a NuBus card in your particular Macintosh or Digidesign
Expansion Chassis, please refer to your Macintosh Owner’s Guide or Digidesign Expan-
sion Chassis User Guide.
