manualshive.com logo in svg

Lexicon NUVERB TDM - REV, Manual, Page: 10 / 67

Share
Download
Lexicon NUVERB TDM - REV Manual Download Page 10

6

6

Lexicon

Installing the Hardware and Software

4. Touch the Macintosh power supply case to discharge any personal static electricity.

5. Remove the NuVerb card from its anti-static bag. Place the anti-static bag on top of the

foam and place the card with its component side facing downward on top of the anti-static
bag. Hold the card only by its edges, and be careful to avoid touching the pins on the
bottom edge of the card.

6. Touch the Macintosh power supply case again to discharge any personal static.

7. Remove the NuVerb  TDM card from its anti-static bag. Hold the card by its edges, and

orient it so that the component side faces away from the palm of your hand.

8. With the TDM card in one hand, pick up the NuVerb card in your other hand. Orient the

cards so that the component sides are facing each other. Carefully line up the black
connectors at the  top of  each card. Firmly press them together until they are  fully
connected.

9. Once the cards are mated, place the assembly, with the  TDM card on top, on the anti-static

bag. When the cards are properly aligned, the four holes in each card (for the four screws
supplied with the TDM card) are aligned.

Summary of Contents for NUVERB TDM - REV




































































Reviews:

No comments