3
A-3
NuVerb
TDM User Guide
Appendix
Applying PONS Dither in Mastering Applications
TDM Mix Setup
1. Create a stereo Master Fader by selecting
New Master Faders
from the
File
menu. Click
on
stereo.
2. If you are employing the Bounce to Disk command or routing the mix to the Main Mix
outputs for auditioning or recording to an external recording device, set the output of the
Master Fader to the
Main Mix
output pair.
If you are recording the mix to disk, set the output of the Master Fader to the the same bus
pair as the inputs of the recording pair of audio tracks.
3. From the Inserts pop-up menu of the Master Fader, select
NuVerb™
. The NuVerb TDM
Plug-In will appear.
If you are employing other inserts on this Master Fader be sure that you select NuVerb on
insert E
.
4. Click on Select Library and select the default library included in your NuVerb folder, or
any library you have created with the NuVerb application containing a program with
PONS.
5. Select a program with PONS from the Program pop-up menu. (PONS is Effect B in the
factory Cascade Programs.) Turn the OUTMIX of Effect A to DRY if you wish to only apply
PONS. Adjust the Dither parameter as desired.
Placement of PONS in the signal chain
PONS is only effective when it is applied as the last DSP element in the signal chain. When
using other inserts on the Master Fader with PONS, always select
insert E
to apply PONS. As
Master Fader inserts are post fader inserts, this allows you to use the Master Fader to adjust the
volume of the mix and employ PONS at the same time.
