manualshive.com logo in svg

Leviton MC24/48, User Manual

Share
Download
Leviton MC24/48 User Manual Download Page 281

Appendix  E:  Remote  Video 

 

 

 

 

 

Software Version 3.05 

E-5 

If you choose the Encore’s Main monitor as the source for the Remote Video, 
then you will be able to see an exact replica of the display on the console’s 
Main monitor, including the Command Line, Status Bar, and all the latest 
information in the current Main monitor display.  The display on the Remote 
Video changes simultaneously with any display changes or edits executed on 
the Main monitor at the console.  Assigning the Main monitor as the source for 
the Remote Video can be very helpful during technical and dress rehearsals 
when the lighting designer needs to sit in the house and still have access to 
specific lighting information. 
 
If you choose the Auxiliary monitor as the source for the Remote Video, you 
will see the display currently assigned to the console’s Auxiliary monitor.  
When the Remote Video source is the Auxiliary monitor, changes in the Main 
monitor display will be reflected on the Remote monitor if they are updated 
information that is pertinent to the current Auxiliary display.  The Auxiliary 
monitor does not display a Command Line, so you cannot view commands on 
your remote monitor while in this mode.  Choosing the Auxiliary monitor as 
the source is helpful when the only information you require is available on one 
display, such as the Playback display.  The stage manager may find it helpful to 
always have access to the current status of lighting cues and their progress, as 
well as submaster types and levels, no matter what displays are being chosen at 
the console. 
 
 
 
 

Remote Video Displays 

 
The displays available to your Remote Video are dependent on your source.  
The displays available from a 

Main monitor

 source are: 

 

??

Stage display 

??

Playback display 

??

Preview display 

??

Patch display 

??

Group display 

??

Patch: Parked Dimmers subdisplay 

??

Submaster display 

??

Patch: Non-Dim Dimmers subdisplay 

??

Effects display 

??

Profile Editor subdisplay 

??

Cuesheet display 

??

Setup display 

??

Tracksheet display 

 
 
The displays available from an 

Auxiliary monitor

 source are: 

 

??

Stage display 

??

Cuesheet display 

??

Preview display 

??

Tracksheet display 

??

Group display 

??

Playback display 

??

Submaster display 

??

Patch display 

??

Effect display 

??

Profile Editor subdisplay 

Summary of Contents for MC24/48







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands