Leviton MC24/48, User Manual

Page: 242 / 294

Colortran Encore Control Console
Software Version 3.05
228
?
E
XAMPLE
:
To adjust the rate of all cue fades that are currently
fading on playback faders:
1.
[RATE] [ENTER]
2. Adjust rate with the wheel by increasing or decreasing fade time.
3. [CLEAR] (Releases rate control
from the wheel.)
When you use the wheel as in the Example above, you increase or decrease the
fade time of all active fades proportionally. When you release rate control with
the [CLEAR] key, the adjusted fade times remain for the fades. You can
readjust the rate by capturing rate control again in the same manner.
If there is more than one fade occurring at the same time, and you want to
adjust the rate of selected cue fades, you can specify the playback fader numbers
that contain the fades you want to control.
?
E
XAMPLE
:
To adjust the rate of cue fades that are fading on specific
playback faders:
1.
[RATE] [fader # list] [ENTER]
2. Adjust rate with the wheel by increasing or decreasing fade time.
3. [CLEAR] (Releases rate control
from the wheel.)
Note that if you adjust the fade rate of a cue that has an effect fading in or out,
the
fade rate of the cue effect is adjusted along with the fade rate of the cue.
?
N
OTE
:
Do not confuse the fade rate of a cue effect with the effect
rate.
Changing Submaster Effect Rates
While an effect is running on a submaster, you can adjust the effect rate with
the [RATE] key.
?
E
XAMPLE
:
To adjust the rate of all effects that are currently running
on submasters:
1.
[RATE] [SUB] [ENTER]
2. Adjust effect rates with the wheel.
3. [CLEAR] (Releases rate control
from the wheel.)