Leviton MC24/48, User Manual

Page: 160 / 294

Colortran Encore Control Console
Software Version 3.05
146
?
E
XAMPLE
:
If you try to select an effect number greater than 99,
a Range Error message appears because the console has a maximum of 99
effects:
1.
[EFFECT]
2. (SEL. FX) [100] (Range Error message appears immediately,
before you press [ENTER].)
Disk I/O Error Message:
A Disk I/O Error message appears whenever
your requested disk function cannot be completed successfully. This message
indicates a problem with the disk drive or the floppy disk itself. Some common
conditions that cause the Disk I/O Error message are:
??
No disk is in the drive when you enter a disk function command.
??
Attempting to record to a write-protected disk.
??
Attempting to use an unformatted disk, or a disk formatted in other than
1.44MB High Density.
??
Attempting to use a damaged disk.
Record Disk Warning:
An Overwrite Warning message appears
whenever you re-record a show onto floppy disk. This warning indicates that
the previous file on disk (with the same disk file name) will be replaced with
the current show in console memory.
Printers
The Encore line of consoles is designed to be compatible with printers that
support the IBM
®
character graphics set. The console sends a transmission to
print 62 lines per page, followed by a form feed. The Encore line is compatible
with the FX and LX line of Epson
®
dot-matrix printers, or with any printer
that supports emulation of Epson FX or LX printers. If you want to use a laser
printer, you must configure that printer to the proper emulation mode. Consult
the owners manual of your printer for more information.