Leviton MC24/48, User Manual

Page: 248 / 294

Colortran Encore Control Console
Software Version 3.05
234
When loading a range of groups to submasters, the groups are loaded to
consecutive submaster numbers, the first group starting with the submaster
indicated. Even if the range of group numbers is not consecutive, the groups
are loaded to consecutive submasters.
?
E
XAMPLE
:
To load a range of groups to submasters:
[LOAD] [GROUP] [#] [>] [#] [ENTER] [press Bump button of
destination sub]
- or -
[LOAD] [GROUP] [#] [>] [#] (ON SUB) [ first sub #] [ENTER]
Loading Effects to Submasters
When the Load command loads an effect to a submaster, the sub type of the
affected submaster is automatically changed to Effect. When the effects loaded
to a submaster are edited after they have been loaded, the changes automatically
update to the effect on the submaster when it is reset to zero.
?
E
XAMPLE
:
To load an effect to a submaster:
[LOAD] [EFFECT] [#] [ENTER] [press Bump button of destination
sub]
- or -
[LOAD] [EFFECT] [#] (ON SUB) [#] [ENTER]
When loading a range of effects to submasters, the effects are loaded to
consecutive submaster numbers, starting with the first submaster specified.
Even when the specified effect numbers are not consecutive, the effects are
loaded to consecutive submasters.
?
E
XAMPLE
:
To load a range of effects to submasters:
[LOAD] [EFFECT] [#] [>] [#] [ENTER] [press Bump button of first
destination sub]
[LOAD] [EFFECT] [#] [>] [#] (ON SUB) [ first sub #] [ENTER]
Loading Cues to Playback Faders
You can use the [LOAD] key to load cues to specific playback faders. When
you load a cue to a playback fader, it becomes a manual fade, even if it is a