manualshive.com logo in svg

Leviton MC24/48, User Manual

Share
Download
Leviton MC24/48 User Manual Download Page 245

 

 

Software Version 3.05 

231 

 

CHAPTER  23: 
Load  Key  Operations 

 
 
 

 

Load Key

 

Figure 22.1, Load Key 

 
 

Load Key 

 
You can use the [LOAD] key to load existing items to submasters or Playback 
Faders.  A submaster can be loaded with a cue, a group, or an effect. Playback 
Faders can have cues loaded to them.   
 
There are two ways to execute load commands: 
 

??

Aim and Load   

 

??

Complete Command   

 
 

Aim and Load:

 

 Press the [LOAD] key and the keys for the item(s) that 

you want to load, followed by [ENTER].  A message box appears on the screen 
instructing you to select the Bump button or Take Control button under the 
submaster or playback fader to which you want the item(s) loaded.  
 
 

Summary of Contents for MC24/48







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands