LevelOne WPS-1133 User Manual Download Page 16

Page: 16 / 84



On the

TCP/IP Settings

screen, specify a fixed or dynamic IP address for the print

server, a fixed IP address is highly recommended. Click

Next

7. In the setup wizard, select an already configured printer from the list, click

Next

and then

Finish

to complete the installation.

or
Select

Add New Printer

if the print server is connected to a printer that hasn’t been

installed before and does not appear in the list.

8. Click

Add New Printer

to launch

Windows Add Printer Wizard

Note:

1. The IP address of print server must be within the same subnet as your network adapter.
2. After you save the new IP address, the print server will automatic reboot once to make
ready for the new IP address. It may take a couple of seconds.

Summary of Contents for WPS-1133





















































































Search results

Summary of Contents for WPS-1133

Reviews:

Related manuals for WPS-1133

Brands by name

Popular brands

LevelOne WPS-1133, User Manual

Search results

Summary of Contents for WPS-1133

Reviews:

Related manuals for WPS-1133

Brands by name

Popular brands