LevelOne WAP-6012 User Manual Download Page 79

Page: 79 / 105

Access Point Management

Firmware Upgrade

The firmware (software) in the Wireless Access Point can be upgraded using your
Web Browser.

You must first download the upgrade file, and then select

Upgrade Firmware

in the

Management

section of the menu. You will see a screen like the following.

Figure 62: Firmware Upgrade Screen

To perform the Firmware Upgrade:

1. Click the

Browse

button and navigate to the location of the upgrade file.

2. Select the upgrade file. Its name will appear in the

Upgrade File

field.

3. Click the

Upgrade

button to commence the firmware upgrade.

The Wireless Access Point is unavailable during the
upgrade process, and must restart when the upgrade
is completed. Any connections to or through the
Wireless Access Point will be lost.

Summary of Contents for WAP-6012










































































































Search results

Summary of Contents for WAP-6012

Reviews:

Related manuals for WAP-6012

Brands by name

Popular brands

LevelOne WAP-6012, User Manual

Search results

Summary of Contents for WAP-6012

Reviews:

Related manuals for WAP-6012

Brands by name

Popular brands