Wireless Access Point User Guide
56
Your network administrator can advise you of the correct settings for each network.
802.1x networks typically use EAP-TLS. This is a dynamic key system, so there is
no need to enter key values.
Enabling Encryption
To enable encryption for a wireless network, follow this procedure:
1. Click on the
Wireless Networks
tab.
Figure 49: Wireless Networks Screen
2. Select the wireless network from the
Available Networks
list, and click
Configure
.
3. Select and enter the correct values, as advised by your Network Administrator.
For example, to use EAP-TLS, you would enable
Data encryption
, and click the
checkbox for the setting
The key is provided for me automatically
, as shown below.
