54
Motion Detection
When you click
Motion Detection
on the Advance mode menu, the Motion
Detection setting menu appears. There are three Motion Detection functions
as sensors to set for different detecting zones. Each one has Threshold and
Sensitivity inputs which you can adjust to specific zone sequentially. Motion
Detection function can support to FTP, SMTP and Alarm output for capturing
and sending images or starting alarm output.
Click it
On
when you use the Motion Detection function and detecting zone
appears for adjusting and moving. The common setting options are displayed
below. If you do not wish to use the Motion Detection function, click it
Off
and
press
OK
.
Motion Detection 1
：
Click it on for using
Motion Detection 1
function as a
sensor. You can adjust and move the detecting zone by using mouse.
Motion Detection 2
：
Click it on for using
Motion Detection 2
function as a
sensor. You can adjust and move the detecting zone by using mouse.
Motion Detection 3
：
Click it on for using
Motion Detection 3
function as a
sensor. You can adjust and move the detecting zone by using mouse.
Threshold
：
You can use the tool bar to set up-limit value. When detecting zone
signals are over setting value, it would carry on assigned work.
Sensitivity
：
You can use the tool bar to set down-limit value. When detecting
zone signals are over setting value, it would carry on assigned work.
Summary of Contents for FCS-7011
Page 38: ...Address Type it from 0 to 128...
Page 40: ...preset position setting...
