Off:
Select if no authentication is necessary when an email is sent.
On:
When authentication is necessary an e-mail is sent, select one of the authentication
methods from the followings.
SMTP:
Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP:
Select if POP before SMTP authentication is necessary when an e-mail is
sent.
Note
：
• When you set to
On
, be sure to select either or both
SMTP
or/and
POP before SMTP
.
POP server name
：
It is necessary when the
POP before SMTP
is selected in
Authentication
.
Type the POP (receiving mail) server name up to 64 characters, or type the IP address of the
POP server. This setting is necessary when the SMTP server which sends e-mails performs
authentication using the POP user account.
User name, Password
：
Type the user name and Password of the user who has the mail
account. This setting is necessary when the SMTP server which sends e-mails performs
authentication.
Recipient e-mail address
：
Type the recipient e-Mail address up to 64 characters. You can
specify up to three recipient E-mail addresses.
Administrator e-mail address
：
Type the Administrator e-Mail address up to 64 characters.
This address is used for reply mail and sending system messages from the SMTP server.
Subject
：
Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is
sent according to the alarm detection when
Alarm sending
of the alarm tab is set to
On
, the
characters standing for the sensor type added to the subject.
Message
：
Type the text of the E-mail up to 384 characters. (A line break is equivalent to 2
characters.)
Alarm sending
Set to send the mail with connection to the alarm detection by the external sensor input or
by the built-in motion detection function.
Summary of Contents for FCS-7011
Page 38: ...Address Type it from 0 to 128...
Page 40: ...preset position setting...
