Initialize
Reboot
：
Click this button to reboot the video server. A confirmation dialogue will appear. Click
O
K
to proceed. It takes about two minutes to reboot the video server.
Factory default
：
Click this button to reset the video server to the factory default settings. A
confirmation dialogue will appear. Click O
K
to proceed, the network indicator on the video
server will start to blink. After completing adjustments to the default settings, the video server
will reboot automatically. Do not turn off the video server until the video server reboots.
Backup setting data
：
Save the setting data of the video server to a file. Click
Save
, and follow
the instructions on the browser to save the setting data file to your specified location.
Restore setting
：
Load the saved setting data of the video server. Click
Browse
and select the
file in which the setting data is stored. Click
OK
, and the video server is adjusted according to
the loaded data and restarted.
Firmware update
：
Upgrade the video server software. Click
Browse
and select the file for
upgrading. A confirmation dialogue will appear. Click
OK
to start upgrading. The video server
will reboot upon completion.
Note:
• Use only upgrade files that are special for this video server. Problems may occur otherwise.
• Do not turn off the video server power or disconnect the network until the upgrading is
completed.
Summary of Contents for FCS-7011
Page 38: ...Address Type it from 0 to 128...
Page 40: ...preset position setting...
