Alarm Output
When you click
Alarm output
on the Advance mode menu, the Alarm output setting menu
appears. You can set in this menu to control the alarm out of I/O port on the rear of the video
server linked to the alarm detection and the timer.
Note
：
This function is only for Video servers which support digital input/output.
Setting
Alarm output
：
To activate the Alarm output function, select
On
. The basic setting options are
displayed below. When you do not use the Alarm output function, select
Off
.
Sensor input 1
：
Click it on for using external sensor which is connected to sensor input1 of
the video server I/O port.
Sensor input 2
：
Click it on for using external sensor which is connected to sensor input2 of
the video server I/O port.
Sensor input 3
：
Click it on for using external sensor which is connected to sensor input3 of
the video server I/O port.
Sensor input 4
：
Click it on for using external sensor which is connected to sensor input4 of
the video server I/O port.
Motion Detection
：
Click it on for using
Motion Detection
function as a sensor. You can set
the motion detection function page.
Note
：
Summary of Contents for FCS-7011
Page 38: ...Address Type it from 0 to 128...
Page 40: ...preset position setting...
