Alarm sending
：
Select
On
to set to send mail with connection to the alarm detection.
File attachment
：
Set whether an image file is attached to the mail sent or not. When
On
is
selected, the image file made by the settings below is attached. When
Off
is selected, only the
message is sent.
Image file name
：
Type the file name you want to assign to the image to attach a mail. You
can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
Sensor input 1
：
Click it on for using external sensor which is connected to sensor input1 of
the video server I/O port.
Sensor input 2
：
Click it on for using external sensor which is connected to sensor input2 of
the video server I/O port.
Sensor input 3
：
Click it on for using external sensor which is connected to sensor input3 of
the video server I/O port.
Sensor input 4
：
Click it on for using external sensor which is connected to sensor input4 of
the video server I/O port.
Motion Detection
：
Click it on for using
Motion Detection
function as a sensor. You can set
the motion detection function page.
Note
：
•
Motion Detection
works only when the Video mode is set to
MPEG-4
and the
Cropping
is
set to
Off
.
Summary of Contents for FCS-7011
Page 38: ...Address Type it from 0 to 128...
Page 40: ...preset position setting...
