SMTP
Set the SMTP menu when you want to send an image via e-mail. By using Mail (SMTP)
function, you can send a mail with attached image which has been shot linked with the
external sensor input or with the built-in motion detection function. The image file can also be
sent periodically. E-Mail (SMTP) setting menu is composed of three tabs,
General
,
Alarm
sending
and
Periodical sending
.
General
Select
On
when you use the SMTP function. The common setting options are displayed
below. If you do not wish to use the e-Mail (SMTP) function, select
Off
and click
OK
.
Note
：
• During transmission of an image file via mail, the frame rate and operation performance of
the monitor image of the main viewer decline.
• While the video server video mode is set to
MPEG-4
, the image of the composite video
signal output from the video output connector of the video server may be distorted during
mail transmission.
• You cannot send an audio file by using the mail sending function.
SMTP server name
：
Type the SMTP server name up to 64 characters, or the IP address of
the SMTP server.
Authentication
：
Select the authentication required when you send an email.
Summary of Contents for FCS-7011
Page 38: ...Address Type it from 0 to 128...
Page 40: ...preset position setting...
