11
Using the Rechargeable Battery
1. Turn the belt clip on the back of the monitor unit, upwards.
2. Remove the battery compartment cover by sliding it
down off the back of the monitor
3. Insert the included rechargeable battery, plug the battery
cord in to the small jack on the inside of the battery
compartment.
Attaching Power to the Charging Base
1. Connect the AC adapter to the charging base as shown in the diagram.
2. Connect the small end into the DC Jack on the back of the charging base, connect the
other end of the adapter into an available wall outlet.
3. For safety reasons, use ONLY the adapters included in the package.
Charging the Monitor and Rechargeable Battery
1. To charge the battery in the monitor unit, place the monitor frontwards onto the
charging dock once the power adapter has been attached.
2. The power LED will light up red to indicate that the battery is being charged.
3. For safety reasons, use ONLY the adapters included in the package.
Note:
When the battery in the monitor is low battery, the power LED will flash
slowly, recharging the battery will be required shortly after.
SETTING UP YOUR SYSTEM
Summary of Contents for TW502
Page 1: ...86H56 0 18 ZZZ P HYDQD FRP...
