17
PAIRING THE DEVICES
The camera and monitor come paired (connected) together. If you do
receive this package and the devices do not automatically connect and
transmit, you may do so manually.
1. Slide the power switch
on the right hand side of the camera to the OFF
position.
2. Cover the light sensor on the front of the
camera with your finger or a cloth.
3. Slide the power switch
on the
camera to the ON position.
4. With the monitor switched on, press and
hold the play/pause button
for
two seconds.
5. The pair icon
will appear on the screen and the power LED on the camera
will blink for a few seconds.
6. Press the menu button
on the monitor to confirm the setting.
7. C1... OK! will appear when the camera and monitor are paired successfully and then
the video and audio will be transmitted automatically.
Note:
If “C1...X” appears (pair failed) instead of “C1...OK!” you will have to remove all
sources of power from the camera and monitor and start the pairing process
over again.
Summary of Contents for TW502
Page 1: ...86H56 0 18 ZZZ P HYDQD FRP...
