12
CAMERA OPERATION
Switching the Camera ON/OFF
Position the camera to view the area you wish to
monitor, angle the camera lens for best view, by
turning it up or down.
1. Slide the power switch
to the ON position.
2. The Power LED on the front of the camera will
light up green. The camera is now ready to
operate.
3. To turn OFF the camera, flip the power switch
back to the OFF position
Note:
If you are using batteries to power the camera unit, and it does not start up
when the power switch is in the ON position, you may need to replace the
batteries. The Power LED will flash slowly when the batteries are low power.
Night Vision
The camera is equipped with eight IR (infrared) LEDs. These LEDs, located on the front of
the camera, allow you to see up to ten feet in complete darkness. Allowing you to check
your baby at any time of night.The night vision LEDs will activate automatically when the
camera detects that the light levels are too low.
Summary of Contents for TW502
Page 1: ...86H56 0 18 ZZZ P HYDQD FRP...
