15
Adjusting the VOX* Sensitivity
VOX = Voice Operated Transmission = Sound Detection
The VOX function causes the camera to transmit video and audio immediately after a
sound is heard. Once transmission begins, the video will play for 10 seconds if no more
noise is heard. Pressing a button on the monitor will also turn the screen and transmission
ON at any time.
Setting the sensitivity of the VOX function will affect how easily the video will be
transmitted, one bar will require much louder sounds being detected before transmission
will begin, than the five bar setting requires.
1. Press the menu button
five times.
2. The
VOX
icon
will display on the screen along with the current status of the
function, either OFF or a gauge indicating the current
sensitivity,
1-5.
3. Use the up and down buttons
on the left side of the monitor to turn the VOX
function OFF or adjust the sensitivity up and down. One bar being the lowest and five
bars being the highest sensitivity.
Selecting a Lullaby
1. Press the play/pause button
on the right hand side of the monitor once.
2. The
lullaby
icon will appear on the monitor screen, and the last played lullaby
will start to play.
3. Press the lullaby button
on the right side of the monitor to select one of five
lullabies to play.
4. Press the up and down volume buttons
during playback to adjust the volume
of the music.
MONITOR OPERATION
Note:
If no number is displayed beside the lullaby icon, all five lullabies will play
one after another until the play/pause button is pressed again.
Summary of Contents for TW502
Page 1: ...86H56 0 18 ZZZ P HYDQD FRP...
