Levana TW502 User Manual Download Page 18

)&&$33529('

 

6$)(7<,16758&7,216

Read and Keep Instructions: 

All the safety and operating instructions should 

be read before the video baby monitor is operated.

Water and Moisture: 

This product is designed for indoor use only. The unit should not 

be place on top of, or beside the product, such as a glass or vase.  This item should not be 

used near water.

Non-Use Periods:  Always unplug the AC adapters from the wall outlets during long 

periods of non-use.

16/09/2010   12:47:22 PM

The manufacturer is not responsible for any radio or TV interference caused by 

authority to operate the equipment.

For baby unit

 

This equipment complies with FCC radiation exposure limits set forth for uncontrolled

environment. Devices that allow transmissions while worn next to the body using an 

accessory are tested with the device and associated accessories in all applicable 

orientations, at the minimum separation distance, using a flat phantom, and 1g SAR <

1.6 W/kg. This transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter. 

 

For parents unit

FCC Label Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: 

This device may not cause harmful interference

This device must accept any interference received, including interference 

that may cause undesired operation

 

This equipment complies with FCC radiation exposure limits set forth for uncontrolled 

environment .This equipment should be installed and operated with minimum distance 

20

 

cm between the radiator

 

& your body.  This transmitter must not be co-located or 

 operating in conjunction with any other antenna or transmitter.

Any changes or modifications not expressly approved by the party 

responsible for compliance could void the user's authority to operate the equipment.

Summary of Contents for TW502





















Reviews: