10
SETTING UP YOUR SYSTEM
Placing the Baby Monitor
This monitor can be placed on a tabletop or hung from a screw on the wall
above the area being monitored. Place the monitor within ten feet of the area being
monitored for best picture and to ensure that everything will be visible with the IR LEDs on.
1. You can carry the monitor on your belt by turning up the clip on the back of the
monitor.
2. You can also set up the monitor on a tabletop by turning the belt clip down and using
it as a support stand.
Battery Operation
The camera unit can be powered using 4 AAA batteries instead of the included AC adapter.
1. Remove the battery compartment cover on the bottom of the camera base, using a
small phillips (cross) head screwdriver.
2. Place 4 AAA batteries (not included) in the compartment, paying attention to the
labelled polarity markings.
3. Replace the battery compartment cover using the small screwdriver.
Note:
The power LED will flash when the battery charge is low.
Attaching Power to the Camera
1. Connect the AC adapter to the transmitter as shown in the diagram.
2. Connect the small end into the DC Jack on the back of the camera, connect the other
end of the adapter into an available wall outlet.
Summary of Contents for TW502
Page 1: ...86H56 0 18 ZZZ P HYDQD FRP...
