Levana TW502, User Manual

Page: 16 / 20

18
TROUBLESHOOTING
PROBLEM SOLUTION
Equipment does not function • Camera and/or monitor are not
switched on
•
The battery is dead or defective
• The power adapters are not connected
No reception • Camera and monitor are not paired
• Camera is too far away from monitor
• The VOX sensitivity is set too low
Reception Interference (static) • The camera and monitor are too far apart
• The battery power is too low
• Other electronic devices are interfering
with the signal
• The camera or monitor are placed near too
many metal objects
Feedback (screeching, static) • The camera and monitor are too close
together
• The volume on the monitor is set too high
Noise • Battery power is too low
Picture works but there is no sound • Volume setting is too low
Picture is black and white • Night vision LEDs are ON
• Increase the amount of light in the room
being monitored
The rechargeable battery will not
charge • The power adapters are not connected
• Battery pack is not plugged in inside the
battery compartment
• The monitor is not docked properly
Maintenance
• Clean the surfaces of the camera and monitor with a soft, fluff-free cloth
• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to
not allow water into any openings
• Never use cleaning agents or solvents