Type overview and accessories
Leuze electronic GmbH + Co. KG
BPS 8
89
A twin special tape is characterized by the following features:
• Two identical tapes are delivered in one package. The tape values as well as the tape tolerances are
identical on both tapes. The tapes are printed with the position value in plain text below and above
the bar code.
• The initial value as well as the final value of the tape (dependent on the BCB G30 ... or BCB G40 ...
grid dimension) according to customer specifications.
• Tape heights are available in millimeter increments in the range from 20 mm to 140 mm.
• The maximum tape length is 10,000 m, the maximum position value is 9999.99 m.
• Twin special tapes longer than 300 m are delivered wound on multiple rolls.
An entry wizard is available for twin special tapes on the Leuze website under the "BPS 8 - Accessories"
heading. The entry wizard provides support when entering the individual pieces of tape data and creates
a query or order form with the correct part number and type designation.
12.2.4 Repair tapes
Repair tapes are produced according to customer specifications.
A repair tape is characterized by the following features:
• The initial value as well as the final value of the tape (corresponding to the BCB G30 ... or
BCB G40 ... grid dimension) according to customer specifications.
• The maximum tape length of a repair tape is 5 m. Repair tapes longer than 5 m must be ordered as
a special tape.
• Repair tapes are available in tape heights of 47 mm and 25 mm.
• Repair tapes are printed below the bar code with the corresponding position value.
• Repair tapes are usually delivered wound on a roll.
An entry wizard is available for repair tapes on the Leuze website under the "BPS 8 - Accessories"
heading. The entry wizard provides support when entering the individual pieces of tape data and creates
a query or order form with the correct part number and type designation.
12.2.5 Marker labels and control labels
Leuze offers a selection of standardized marker and control labels
• Marker or control labels are available in a grid dimension of 30 mm (BCB G30 ...) and 40 mm
(BCB G40 ...).
• Marker or control labels are available in a height of 47 mm.
• Control label BCB ... MVS, base color red
• Control label BCB ... MV0, base color yellow
• Marker label BCB ... ML base color red
• Marker labels and control labels are individual labels that are delivered in a packaging unit containing
10 pieces.
All available marker and control labels are listed on the Leuze website under the respective, selected BPS
product under the "Accessories" heading.
12.3 Accessories – Modular connection unit
Part no.
Type designation
Description
50101699
MA 8.1
Connection unit with RS 232 interface for BPS 8, M12 connector,
operating voltage 10 … 30VDC
50104790
MA 8-01
Connection unit with RS 485 interface for BPS 8, M12 connector,
operating voltage 10 … 30VDC, termination network 390
/ 220
/ 390
50104789
MA 8-02
Connection unit with RS 485 interface for BPS 8, M12 connector,
operating voltage 10 … 30VDC, termination network 47k
/ 150
/ 47k
