PROFIBUS
Leuze electronic
BCL 34
47
TNT
35/7-2
4
V
8.2
Structure of the project modules
In the current version, a total of 50 modules are available for use. A "Device Module" ( see
"Permanently defined parameters (device parameters)" on page 45) is used for basic
scanner configuration and is permanently integrated into the project. A further 50 modules
may be included into the project according to requirements and application.
The modules fall into the following categories:
• Parameter module for the scanner configuration
• Status or control modules that influence the input and output data.
• Modules that may include both parameters and control or status information.
The category of each module is marked with a cross in the overview.
8.2.1
Overview of the project modules
Notice!
Inputs and outputs are described from the perspective of the PROFIBUS master.
Module
No.
Module
Description
Para-
meter
Output
data
Input
data
1
Extension of the permanently defined code table
(see table 8.1 on page 46)
X
2
Extension of the permanently defined code table
(see table 8.1 on page 46)
X
3
Extension of the permanently defined code table
(see table 8.1 on page 46)
X
4
Extension of the permanently defined code table
(see table 8.1 on page 46)
X
5
Output of several barcodes per reading gate
X
X
X
6
Extended control of the reading gate
X
7
Processing of the barcode checksum
X
8
Search for an EAN128 designator
X
9
Alignment and limitation of the laser beam onto the
barcode.
X
10
Definitions for Pharmacode readings
X
11
The module permits changing the muted zones, the
line-gap-ratios as well as the Equal Scans
X
12
Specification for formatting the data output
X
13
Specification of the switching input
X
X
14
Specification of the switching output
X
X
15
AutoReflAct (automatic
reflector activation)
Module 15
Automatic reading activation
X
X
X
16
Automatic monitoring of the reading properties
X
X
17
Activation of reference code comparison and specifica-
tion of the mode of operation
X
X
X
Table 8.3:
Overview of the project modules
Summary of Contents for BCL34
Page 1: ...BCL34 Barcode reader GB 05 10 08 50038851 T E C H N I C A L D E S C R I P T I O N...
Page 98: ...Appendix 96 BCL 34 Leuze electronic 12 Appendix 12 1 EU Declaration of Conformity...
Page 102: ...Index 100 BCL 34 Leuze electronic V Vibration 18 W Warm up time 18 Warning notices 8 Weight 17...