manualshive.com logo in svg

Leuze BCL 92, Original Operating Instructions

The Leuze BCL 92 is a cutting-edge device that offers advanced automation solutions. Its Original Operating Instructions manual can be easily accessed and downloaded for free from manualshive.com, ensuring users have all the necessary information to optimize their experience with this exceptional product.

Share
Download
background image

Configuration and diagnostics software - Sensor Studio

Leuze electronic GmbH + Co. KG

BCL 92

31

6.5.5

Reference code tab

Fig. 6.10: 

Reference Code

 tab

A reference code is bar code information which is stored in the memory of the scanner.

The reference code can be compared with the current decoded bar code in various modes and, thus, the
switching output be set appropriately. For this purpose, the switching output must be set to 

Reference

Code Compare

 (

Positive Reference Code Compare

 or 

Negative Reference Code Compare

) in the

switching output (switch)

 menu.

Summary of Contents for BCL 92


































































Reviews:

No comments

Related manuals for BCL 92

Symbol LS3478 Configuration Manual preview
LS3478
Brand: Symbol Pages: 6
Xcellon CR-M10 User Manual preview
CR-M10
Brand: Xcellon Pages: 8
Franklin MOVIEVIEWS FLX-110 User Manual preview
MOVIEVIEWS FLX-110
Brand: Franklin Pages: 22
Hama 91093 Operating Instructions Manual preview
91093
Brand: Hama Pages: 22
IDTECH BTScan User Manual preview
BTScan
Brand: IDTECH Pages: 73
BBPOS WPD30 Instruction Manual preview
WPD30
Brand: BBPOS Pages: 6
TSC TTP-342M Plus User Manual preview
TTP-342M Plus
Brand: TSC Pages: 33
TSC TTP-245 Plus User Manual preview
TTP-245 Plus
Brand: TSC Pages: 50
TSC TTP-2610MT Series User Manual preview
TTP-2610MT Series
Brand: TSC Pages: 68
Elkron DK3000M-P Complete Manual preview
DK3000M-P
Brand: Elkron Pages: 2
mt-mobility MT 1890 Operation Manual preview
MT 1890
Brand: mt-mobility Pages: 3
Bell System bellswipe Manual preview
bellswipe
Brand: Bell System Pages: 21
Motion F5 Series Easy Connect User Manual preview
F5 Series Easy Connect
Brand: Motion Pages: 28
RIOTEC iLS6308KBU Programming Quick Manual preview
iLS6308KBU
Brand: RIOTEC Pages: 4
Manhattan 100786 User Manual preview
100786
Brand: Manhattan Pages: 8
Saveo Scan RCCD-H Quick Manual preview
RCCD-H
Brand: Saveo Scan Pages: 3
Zebex Z-3392 Service Manual preview
Z-3392
Brand: Zebex Pages: 12
Hama Photo Player Operating Instruction preview
Photo Player
Brand: Hama Pages: 51

Brands by name

Popular brands

Load more brands