Leuze BCL 92 Original Operating Instructions Download Page 20

Page: 20 / 65

Configuration and diagnostics software - Sensor Studio

Leuze electronic GmbH + Co. KG

BCL 92

Configuration and diagnostics software - Sensor Studio

The

Sensor Studio

configuration software provides a graphical user interface for the operation, configura-

tion and diagnostics of the device via the RS 232 service interface.

A device that is not connected to the PC can be configured offline.

Configurations can be saved and reopened as projects for transferring back to the device at a later time.

NOTICE

Only use the

Sensor Studio

configuration software for products manufactured by Leuze.

The

Sensor Studio

configuration software is offered in the following languages: German, Eng-

lish, French, Italian and Spanish.

The FDT frame application of the

Sensor Studio

supports all languages; all languages may not

be supported in the device DTM (Device Type Manager).

The

Sensor Studio

configuration software is designed according to the FDT/DTM concept:

• You make the individual configuration settings for the bar code reader in the Device Type Manager

(DTM).

• The individual DTM configurations of a project can be called up via the frame application of the Field

Device Tool (FDT).

• Communication DTM for bar code readers:

LeCommInterface

• Device DTM for the BCL 92 bar code reader

Procedure for the installation of the software and hardware:

Install the

Sensor Studio

configuration software on the PC.

Install the communication and device DTM. Communication and device DTM are included in the

Le-

AnalysisCollectionSetup

installation package.

Create device DTM for BCL 92 in the project tree of the

Sensor Studio

FDT frame.

Connect bar code reader to PC (see chapter 5.8 "PC or terminal connection").

Activate service interface on bar code reader (see chapter 7.4.1 "Service mode").

6.1

System requirements

To use the

Sensor Studio

configuration software, you need a PC or laptop with the following specifications:

Tab. 6.1:

System requirements for

Sensor Studio

installation

Operating system

Windows XP or higher (32 bit, 64 bit)

Windows Vista

Windows 7

Windows 8

Computer

Processor type: 1 GHz or higher

Serial COM interface

CD-ROM drive

Main memory (RAM): at least 64 MB

Keyboard and mouse or touchpad

Graphics card

At least 1024 x 768 pixels

Required hard disk capacity for

Sensor Studio

and

communication DTM

35 MB

NOTICE

Administrator privileges on the PC are necessary for installing

Sensor Studio

Summary of Contents for BCL 92


































































Search results

Summary of Contents for BCL 92

Reviews:

Related manuals for BCL 92

Brands by name

Popular brands

Leuze BCL 92, Original Operating Instructions

Search results

Summary of Contents for BCL 92

Reviews:

Related manuals for BCL 92

Brands by name

Popular brands