Starting up the device - Configuration
Leuze electronic GmbH + Co. KG
BCL 248i
81
Parameter length
37 bytes
Input data
None
Output data
None
Identifier string n (n = 1 … 5)
The identifier string defines both the identifier list for the segmentation and the passthrough filter for the
subsequent filtering.
The string may contain wildcards. Any number of '?' is permitted as placeholders for an arbitrary character
at exactly that defined position.
Also permitted are '*' as placeholders for a character sequence of arbitrary length, and an 'x' if the charac-
ter at the respective position is to be deleted. There are a total of five identifier strings.
An identifier with less than 5 characters must be null terminated. However, if the identifier string consists of
exactly 5 characters, it does not have to be terminated.
NOTICE
ASCII characters that cannot be displayed (<0x20h) must not be used in the identifier strings.
8.10.3 Module 54 – Segmentation according to identifier and separator
PROFINET-IO module identifier
Module ID: 1054
Submodule ID: 1
Description
This module activates the segmentation according to identifier and separator. The parameters specify the
identifiers to be searched for, the output mode, and the parameters for the identifier/separator algorithm.
Parameter
Tab. 8.31:
Parameters for module 54
Parameter
Description
Addr. Data type
Value range
Default
Identifier list
Identifier 1
The identifier string is used for the
identifier list and the filtering ac-
cording to the segmentation.
0
STRING
5 characters
null termi-
nated
1 … 5 bytes of
ASCII characters
'*'
Identifier 2
See identifier 1
5
STRING
5 characters
null termi-
nated
1 … 5 bytes of
ASCII characters
\0
Identifier 3
See identifier 1
10
STRING
5 characters
null termi-
nated
1 … 5 bytes of
ASCII characters
\0