Safety instructions
Application as directed
12
Lenze ¯ MA 12.0018 ¯ 4.1
2.2
Application as directed
All products which this documentation applies to are no household appliances but are
exclusively intended as components for re−utilisation for commercial use or
professional use in terms of IEC/EN 61000−3−2. They meet the requirements of the
Low−Voltage Directive 2014/35/EU and the requirements of the harmonised standards
of the IEC/EN 60034 series.
Only use the products under the operating conditions and power limits specified in this
documentation.
Do not use the brakes installed as fail−safe brakes. It cannot be ruled out that the braking
torque is reduced by disruptive factors which cannot be influenced.
¯
Drives
–
... must only be operated under the operating conditions and power limits
specified in this documentation.
–
... comply with the protection requirements of the EU Low−Voltage Directive.
Any other use shall be deemed inappropriate!
2.3
Foreseeable misuse
Impermissible applications:
¯
In a potentially explosive atmosphere
–
Exception: special ATEX design
¯
In aggressive environments (acids, gases, vapours, dusts, or oils).
¯
Under water or in liquids
¯
Under radiation
2.4
Residual hazards
Protection of persons
¯
Risk of burns!
–
Hot surfaces up to 140 °C during operation! Provide protection against contact.
¯
Highfrequency voltages can be capacitively transferred to the motor housing
through the inverter supply.
–
Earth motor housing carefully.
¯
Risk of injury due to rotating shaft!
–
Before working on the drive system, ensure that the motor is at a standstill.
¯
Danger of unintentional starting or electrical shocks!
–
Connections must only be made when the equipment is deenergised and the
motor is at standstill.
–
Installed brakes are no fail−safe brakes.
¯
Dangerous voltages at the power terminals, even if the plug is removed: residual
voltage >60 V!
