Maintenance
Maintenance operations
Table of lubricants
61
Lenze ¯ MA 12.0018 ¯ 4.1
7.3.2
Table of lubricants
Lenze recommends the use of the following lubricants.
If you carry out an oil change, use the same type of oil as specified on the nameplate. The
oil changing intervals are reference values for normal ambient conditions and a
maximum oil temperature of 70 °C. Difficult operating conditions (e.g. high
temperatures, aggressive ambient media) require shorter intervals.
Lubricant
Ambient
temperature
Specification
Changing intervals at 70°C
Lubricant manufacturer
For the first
time after
Not later than
after
Fuchs
Klüber
Shell
CLP 220
0 °C ... + 40 °C
Mineral oil with
EP additives
16000 h
3 years
Renolin
CLP220 / CLP
Plus 220
Klüber oil
GEM 1−220 N
Omala S2 G220
Omala S2 GXV
220
CLP 460
0 °C ... + 40 °C
Mineral oil with
EP additives
16000 h
3 years
Renolin
CLP460 / CLP
Plus 460
Klüberoil
GEM 1−460 N
Omala S2 G460
Omala S2 GXV
460
CLP HC 220
−30 °C ... + 40 °C
Synthetic oil
with a
poly−alpha−olefin
basis
25000 h
4 years
Renolin Unisyn
CLP220 / XT 220
Klübersynth
GEM 4−220 N
Omala S4 GXV
220
CLP HC 320
−20 °C ... + 50 °C
Synthetic oil
with a
poly−alpha−olefin
basis
25000 h
4 years
Renolin Unisyn
CLP320 / XT 320
Klübersynth
GEM 4−320 N
Omala S4 GXV
320
CLP HC 220
USDA H1
−20 °C ... + 40 °C
Synthetic oil
with a
poly−alpha−olefin
basis
H1 approval
16000 h
3 years
Cassida Fluid
GL 220
Klüberoil
4 UH1−220 N
−−−−−
CLP PG 460
USDA H1
−20 °C ... + 40 °C
Synthetic oil
with a polyglycol
basis
H1 approval
16000 h
3 years
Cassida Fluid
WG 460
Klüberoil
UH1 6−460
−−−−−
Tab. 10
Overview of lubricant types
Lubricants with a USDA H1 approval are approved for the use in the food industry.
Note!
In case of ambient temperatures < −20°C or > +40°C, please contact
Lenze!
Observe increased starting torques at low temperatures!
The type of lubricant indicated on the nameplate by the following manufacturers is
approved.
Shell
Klüber
Fuchs
