System bus (CAN) with Servo PLC & Drive PLC
System blocks
6.4
CAN3_IO
6-15
L
PLC-Systembus EN 1.1
Process data telegram
The process data telegram consists of an
identifier
and 8 bytes of user data.
11-bit
8-byte user data
Identifier
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
Byte 6
Byte 7
Byte 8
Identifier
Information about the identifier can be found in chapter 2.3.1.
User data
The first 4 of the 8 bytes of user data received are assigned to several variables of a different data
type at the same time and can therefore - as required - be evaluated as
•
binary information (1-bit)
•
quasi-analog value (16-bit)
•
phase-angle information (32-bit)
in the PLC program:
Byte
Variable (1-bit)
Variable (16-bit)
Variable (32-bit)
1, 2
CAN3_bInB
0
_b
...
CAN3_bInB
15
_b
CAN3_nInW1_a
CAN3 dnInD1 p
3, 4
CAN3_bInB
16
_b
...
CAN3_bInB
31
_b
CAN3_nInW2_a
CAN3_dnInD1_p
5, 6
CAN3_nInW3_a
7, 8
CAN3_nInW4_a
Tip!
Via code C0357/3 you can set the monitoring time for data receipt. (Default setting: 3000 ms)
•
Additional information can be found in chapter 3.10.1.
Show/Hide Bookmarks
