Lenze 9212, Operating Instructions Manual, Page: 6 / 86

2
Safety information
for electrical equipment used in industrial power installations.
The electrical devices and machines described are equipment to be
used in industrial power installations. This equipment incorporates
hazardous parts that are live, moving or rotating during operation.
Severe personal injury or damage to equipment may occur if e. g.
any required enclosures or covers are inappropriately removed or
the equipment is insufficiently serviced.
The personnel responsible for the safety of the equipment must
therefore ensure that:
•
only qualified personnel are permitted to install, operate and
maintain the devices
•
these Operating Instructions and any other documentation
about the equipment are consequently observed and always
available to the personnel working with the equipment.
•
non-qualified personnel is prohibited from working with the
equipment or in its vicinity.
•
the system is installed in accordance with local regulations.
A qualified person must by training be familiar with all relevant
standards and safety regulations and therefore be authorized to
perform the required work (For further details cf. IEC 364).
These safety instructions do not claim to be exhaustive. Should any
questions or problems occur, please contact your nearest Lenze
representative.
The information given in these Operating Instructions refer to the
specified hardware and software versions of the equipment.
The specifications, processes and ciruitry described in these
Operating Instructions are for guidance only and must be adapted
to your specific application.
Lenze cannot be held responsible for the applicability of the
processes and circuitry indicated.
The specifications in these Operating Instructions describe, not
guarantee the features of the equipment.
Hardware, software and documentation of the equipment have
been carefully checked by Lenze. Faultlessness cannot be
guaranteed.
Subject to technical alterations.