Lenovo ThinkStation P520 User Manual Download Page 66

Page: 66 / 174

Bluetooth problems

Note:

The Bluetooth feature is available only on some models.

The Bluetooth feature does not work.

Solutions:

• Enable the Bluetooth feature in the Setup Utility program.

• Enable the Bluetooth devices. Do the following:

1. Right-click the Start button to open the Start context menu.

2. Click

Device Manager

. Type the administrator password or provide confirmation if prompted.

3. Expand

Bluetooth

to display the Bluetooth devices. Then, right-click each Bluetooth device and then

Click

Enable device

4. Expand

Network adapters

. Then, right-click each Bluetooth device and then Click

Enable device

• Turn on the Bluetooth radio on Windows 10. Do the following:

1. Click the Start button to open the Start menu.

2. Click

Settings

➙

Devices

➙

Bluetooth & other devices

3. Turn on the

Bluetooth

switch to enable the Bluetooth feature.

• Update or reinstall the Bluetooth driver. See “Keeping your computer current” on page 28.

No sound comes from the Bluetooth headset or headphones.

Solution:

Set the Bluetooth headset or headphones as the default device.

1. Exit the application that uses the sound device (for example, Windows Media Player).

2. Right-click the volume icon in the Windows notification area on the taskbar.

Note:

If the volume icon is not displayed in the Windows notification area, add the icon to the

notification area. See the Windows help system.

3. Click

Playback devices

4. If you are using the Headset profile, select

Bluetooth Hands-free Audio

, and then click

Set Default

. If

you are using the AV profile, select

Stereo Audio

, and then click

Set Default

5. Click

Performance problems

Excessive fragmented files exist on the storage drives.

Solution:

Use the Windows disk defragmentation or disk optimization feature to clean up the files.

Note:

Depending on the volume of the storage drives and amount of data stored on the storage drives, the

disk-defragmentation process might take up to several hours.

1. Close any open programs and windows.

2. Click the Start button to open the Start menu.

3. Click

Windows System

➙

File Explorer

➙

This PC

4. Right-click your C drive and then click

Properties

P520 User Guide

Summary of Contents for ThinkStation P520















































































































































































Search results

Summary of Contents for ThinkStation P520

Reviews:

Lenovo ThinkStation P520, User Manual, Page: 66 / 174

Search results

Summary of Contents for ThinkStation P520

Reviews: