manualshive.com logo in svg

Lenovo ThinkStation P520, User Manual, Page: 101 / 174

Share
Download
Lenovo ThinkStation P520 User Manual Download Page 101

What to do next: 

•  To work with another piece of hardware, go to the appropriate section.

•  To complete the installation or replacement, go to “Completing the parts replacement” on page 134.

2.5-inch storage drive

To remove or install a 2.5-inch storage drive in a conversion bracket, do the following: 

1.  Prepare your computer. See “Preparing your computer and removing the computer cover” on page 59.

2.  Locate the storage drive bay. See “Internal storage drives” on page 10.

3.  Ensure that all the cables are disconnected from the storage drive. Press both clips simultaneously 

toward each other and pull the conversion bracket out of the storage drive bay. 

Figure 64. Removing the conversion bracket

4.  Flex both sides of the conversion bracket to remove the 2.5-inch storage drive from the bracket. 

Figure 65. Removing the storage drive from the conversion bracket

5.  To install a 2.5-inch storage drive, ensure that the conversion bracket is folded. To fold the bracket, do 

the following: 

Chapter 7

.

Hardware removal and installation

89

Summary of Contents for ThinkStation P520















































































































































































Reviews:

No comments