Lenovo ThinkPad L450, User Manual

Page: 104 / 186

• When installing the storage drive or optical drive, follow the instructions shipped with your hardware, and
apply pressure only where needed on the device.
• After you replace the primary storage drive, reattach the cover of the drive slot.
• When replacing the storage drive, reattach the cover of the drive slot.
• Store your external and removable storage drive or optical drives in the appropriate containers or
packaging when they are not being used.
• Before you install any of the following devices, touch a metal table or a grounded metal object. This action
reduces any static electricity from your body. The static electricity could damage the device.
• While transferring data to or from a flash media card, such as an SD card, do not put your computer in
sleep or hibernation mode before the data transfer is complete. To do so might cause damage to your
data.
Taking care when setting passwords
• Remember your passwords. If you forget a supervisor or hard disk password, Lenovo will not reset it,
and you might have to replace your system board or storage drive.
Taking care of the fingerprint reader
The following actions could damage the fingerprint reader or cause it not to work properly:
• Scratching the surface of the fingerprint reader with a hard, pointed object.
• Scraping the surface of the fingerprint reader with your fingernail or anything hard.
• Using or touching the fingerprint reader with a dirty finger.
If you notice any of the following conditions, gently clean the surface of the fingerprint reader with a dry,
soft, lint-free cloth:
• The surface of the fingerprint reader is dirty or stained.
• The surface of the fingerprint reader is wet.
• The fingerprint reader often fails to enroll or authenticate your fingerprint.
Registering your computer
• Register your ThinkPad computer with Lenovo at http://www.lenovo.com/register. For more information,
see “Registering your computer” on page 15.
Be sure not to modify your computer
• Only an authorized ThinkPad repair technician should disassemble and repair your computer.
• Do not modify or tape the latches to keep the display open or closed.
Cleaning the cover of your computer
Occasionally clean your computer by doing the following:
1. Prepare a mixture of a gentle kitchen-use detergent. The detergent must not contain abrasive powder or
strong chemicals such as acid or alkaline. Use five parts water to one part detergent.
2. Absorb the diluted detergent into a sponge.
3. Squeeze excess liquid from the sponge.
4. Wipe the cover with the sponge, using a circular motion and taking care not to let any excess liquid drip.
5. Wipe the surface to remove the detergent.
6. Rinse the sponge with clean running water.
7. Wipe the cover with the clean sponge.
88
User Guide