Lenovo ThinkPad L450, User Manual

Page: 123 / 186

Solution : The battery power is getting low. Connect the ac power adapter to the computer and plug it
into an electrical outlet, or replace the battery with a charged one.
• Problem : The computer display remains blank after you press Fn to return from sleep mode.
Solution : Check whether an external monitor was disconnected or turned off while the computer was in
sleep mode. If you disconnected or turned off the external monitor, connect it or turn it on before resuming
the computer from the sleep mode. When resuming the computer from the sleep mode without attaching
the external monitor or turning it on, and the computer display remains blank, press the display-mode
switching key to bring up the computer display.
• Problem : The computer does not return from sleep mode, or the system-status indicator blinks slowly
and the computer does not work.
Solution : If the system does not return from sleep mode, it might have entered sleep or hibernation mode
automatically because the battery is depleted. Check the system-status indicator.
– If the system-status indicator blinks slowly, your computer is in sleep mode. Connect the ac power
adapter to the computer; then press Fn.
– If the system-status indicator is off, your computer is in power-off state or hibernation mode. Connect
the ac power adapter to the computer; then press the power button to resume operation.
If the system still does not return from sleep mode, your system might stop responding and you might not
be able to turn off the computer. In this case, you need to reset the computer. If you have not saved your
data, it might be lost. To reset the computer, press and hold the power button for 4 seconds or more. If
the system is still not reset, remove the ac power adapter and the battery.
• Problem : Your computer does not enter sleep or hibernation mode.
Solution : Check whether any option has been selected to disable your computer from entering sleep
or hibernation mode.
If your computer tries to enter sleep mode but the request is rejected, the device attached to the USB
connector might have been disabled. If this occurs, do a hot-unplug-and-plug operation for the USB
device.
• Problem : The battery discharges slightly while the computer is in hibernation mode.
Solution : If the wakeup function is enabled, the computer consumes a small amount of power. This is not
a defect. For details, refer to “Power-saving modes” on page 26.
Problems with drives and other storage devices
This section includes storage drive problems, and optical drive problems.
Hard disk drive or hybrid drive problems
• Problem : The hard disk drive or hybrid drive makes a rattling noise intermittently.
Solution : The rattling noise might be heard:
– When the hard disk drive or hybrid drive begins or finishes getting access to data.
– When you carry the hard disk drive or hybrid drive.
– When you carry your computer.
This is a normal characteristic of a hard disk drive or hybrid drive and is not a defect.
• Problem : The hard disk drive or hybrid drive does not work.
Chapter 8
.
Troubleshooting computer problems
107