Lenovo ThinkPad L450 User Manual Download Page 60

Page: 60 / 186

Detaching a ThinkPad docking station

To detach your computer from a ThinkPad docking station, do the following:

Note:

The ThinkPad Basic Dock does not have the system lock.

1. Disconnect all cables and devices from the computer.

2. Ensure that the system lock key is turned to the unlocked position (horizontal).

3. Press the eject button until the computer moves up. Then, grasp both sides of the computer to remove it.

Connecting external displays to a docking station

For the ThinkPad Pro Dock, if you connect two external displays to the DisplayPort connector and the DVI
connector, the DVI connector is inactive.

For the ThinkPad Ultra Dock, if you connect two external displays to the DisplayPort connector and the DVI
connector, the DVI connector is inactive.

User Guide

Summary of Contents for ThinkPad L450



























































































































































































Search results

Summary of Contents for ThinkPad L450

Reviews:

Related manuals for ThinkPad L450

Brands by name

Popular brands

Lenovo ThinkPad L450, User Manual

Search results

Summary of Contents for ThinkPad L450

Reviews:

Related manuals for ThinkPad L450

Brands by name

Popular brands