Lenovo ThinkCentre M90t User Manual Download Page 82

Page: 82 / 126

7. Remove the coin-cell battery.

8. Install the coin-cell battery.

9. Reinstall all removed parts. Then, reconnect all disconnected cables to the computer and reconnect the

power cord to the electrical outlet.

10. Reset the system date and time in the UEFI BIOS menu.

To dispose of the coin-cell battery, refer to the “Lithium coin-cell battery notice” in the

Safety and Warranty

Guide

Power supply assembly

Prerequisite

Before you start, read Appendix A “Important safety information” on page 85 and print the following
instructions.

Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.

M90t User Guide

Summary of Contents for ThinkCentre M90t































































































































Search results

Summary of Contents for ThinkCentre M90t

Reviews:

Related manuals for ThinkCentre M90t

Brands by name

Popular brands

Lenovo ThinkCentre M90t, User Manual

Search results

Summary of Contents for ThinkCentre M90t

Reviews:

Related manuals for ThinkCentre M90t

Brands by name

Popular brands