Lenovo ThinkCentre M90t User Manual Download Page 115 | Manualshive

Page: 115 / 126

background image

Disposing of battery packs from Lenovo products

Your Lenovo device might contain a lithium-ion battery pack or a nickel metal hydride battery pack. You can
find details on the battery pack in the product documentation. If you need to dispose of a battery pack,
insulate it with vinyl tape, contact Lenovo sales, service, or your place of purchase, or a waste-disposal
operator, and follow their instructions. You also can refer to the instructions provided in the user guide for
your product.

For proper collection and treatment, go to:

https://www.lenovo.com/lenovo/environment

Recycling information for mainland China

Battery recycling information for Taiwan

Restriction of Hazardous Substances (RoHS) Directive of countries and
regions

The latest environmental information about Lenovo products is available at:

https://www.lenovo.com/us/en/compliance/eco-declaration

European Union RoHS

This Lenovo product, with included parts (cables, cords, and so on) meets the requirements of Directive
2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic
equipment ("RoHS recast" or "RoHS 2").

For more information about Lenovo worldwide compliance on RoHS, go to:

https://www.lenovo.com/rohs-communication

Turkish RoHS

The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use
of Certain Hazardous Substances in Waste Electrical and Electronic Equipment (WEEE).

Appendix D. Compliance and TCO Certified information

109

«
...
113
114
115
116
117
...
»

Summary of Contents for ThinkCentre M90t































































































































Reviews:

No comments

Related manuals for ThinkCentre M90t

POWERMATE ES 5250 - S

Brand: NEC Pages: 18

POWERMATE VT 300 RELEASE NOTES

Brand: NEC Pages: 16

POWERMATE CT 815 - RELEASE NOTES

Brand: NEC Pages: 155

Brand: NEC Pages: 6

POWERMATE ES Series

Brand: NEC Pages: 132

POWERMATE ES Series

Brand: NEC Pages: 8

Brand: NEC Pages: 167

Brand: NEC Pages: 1

Brand: Gateway Pages: 126

Afolux LX Series

Brand: IEI Technology Pages: 131

Brand: Vecow Pages: 160

Brand: Oval Pages: 18

Brand: Acer Pages: 47

Brand: IBM Pages: 126

Brand: Dell Pages: 27

Brand: Dell Pages: 25

OptiPlex 980 - Desktop

Brand: Dell Pages: 101

FocusPRO 6000 Series

Brand: Honeywell Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands