Lenovo ThinkCentre M90t User Manual Download Page 34

Page: 34 / 126

2. Disconnect all power cords from electrical outlets. Then, remove any parts that impede access to the

Clear CMOS /Recovery jumper.

3. Move the jumper from the standard position to the maintenance position.

4. Reconnect the power cords for the computer and the monitor to electrical outlets.

5. Turn on the computer and the monitor. When the computer beeps, wait for approximately 10 seconds.

6. Turn off the computer by holding the power button for approximately four seconds.

7. Disconnect all power cords from electrical outlets.

8. Move the jumper back to the standard position.

9. Reinstall all the parts that have been removed. Then, reconnect the power cords for the computer and

the monitor to electrical outlets.

10. Turn on the computer and the monitor. When the logo screen is displayed, press F1 or Fn+F1.

11. To prevent data loss, ensure that BIOS settings are restored to an earlier point. For BIOS configurations,

see Chapter 5 “UEFI BIOS” on page 23.

M90t User Guide

Summary of Contents for ThinkCentre M90t































































































































Search results

Summary of Contents for ThinkCentre M90t

Reviews:

Related manuals for ThinkCentre M90t

Brands by name

Popular brands

Lenovo ThinkCentre M90t, User Manual

Search results

Summary of Contents for ThinkCentre M90t

Reviews:

Related manuals for ThinkCentre M90t

Brands by name

Popular brands